A corner flat is located at the end of the building: that is, a part of its walls are not adjacent to the interiors, however would be the outer walls of the home.
There might be one flat at a corner flat – it occupies the entire end of the home, it is also called a corner apartment. Or 2 – the windows of one overlook the street, the second – the yard. Depends on the building plan, the layout of the premises.
There’s also a”separate caste” – casing with walls from the expansion joints. Such”gaps” between entrances are typically made in multi-story buildings, the most important job of the created unit – to break the deformation forces through the shrinkage of the construction, in the event of emergencies. Pros and cons of corner flats domikday.ru in the joint are slightly different from the normal ones using this road – we’ll pay special attention to the topic in the previous section.
Since the 2-3 sides of this space is outdoors, in winter it’s 3-5C colder, and in summer on the contrary – hotter. Particularly if the conclusion of the home is heated from the sun. Sometimes, the gap reaches 10C – however such a difference is improper, suggests that a problem with the exterior of the home – most likely have to get in touch with the management firm, asking (or forcing) to fulfill their immediate responsibilities, to patch the cracks shaped.
Corner apartment in a brick house with thick walls is more comfortable. Such risks aren’t exposed – the thickness of the wall acts as a buffer, not letting overheating, overcooling.
When a room has only 1 wall united with the road, it generally has enough room heat to avoid freezing and condensation. But if there are two outside partitions, and they’re adjacent – there is a high probability of freezing at the corner, the creation of condensation inside, and thus – mold, fungus. Their spores not just spoil the look of the room, but also lead to the appearance, complication of many serious diseases.
Important! The problems of corner location are compounded when the variables are linked – also low temperature from heating batteries together with dampness is certain to result in moldy walls.